(PRE-ORDER) Flycolor Raptor TR20 Mini Stack - F722 Flight Controller 60A 3-6S BLHeli32 4in1 ESC - 20x20mm
The Flycolor Raptor TR20 Mini Stack features an F722 Flight Controller, equipped with dual VTX and dual LED pads, offering a convenient selection nearby for enhanced customization. With a voltage output range of 3.3V/0.1A, 5V/3A, and 9V/1.5A, this stack ensures stable power distribution. The MPU-6500 SPI gyro and STM32F722 MCU provide precise control, while the 60A ESC, with configurator support via BLHeliSuite32, INAV firmware compatibility, and a 20x20mm mounting pattern, delivers optimal performance for your FPV drone. Compact at 44x36mm and lightweight at 23g, the Raptor TR20 is designed for efficiency, supporting LiPo batteries from 3-6S and making it an ideal choice for your FPV drone and cinematography endeavors.
Check out all our 30x30mm Stacks and the rest of our Flycolor Products!
Features:
- Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling
- The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and *Multishot
- MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight
- Miniaturized and lightweight design, better routing, and component layout
- Configurator for ESC Parameter setting and upgrading: BLHeliSuite32
- MCU STM32G0, ARM 32-bit Cortex MCU, frequency up to 64 MHz
- All Dshot and Proshot signals are supported
- 20x20mm, M3 mounting pattern
- PWM frequency up to 128K
- Flycolor_Raptor_5 firmware
Specifications
-
F722 FLIGHT CONTROLLER
- Dual VTX and dual LED pads for convenient selection nearby.
- Voltage output: 3.3V/0.1A, 5V/3A , 9V/1.5A
- Gyro: MPU-6500 SPI
- FC BEC: 3.3V5V9V
- MCU: STM32F722
- Const Curr.: 60A
- Size(mm): 44*36
- Burst Curr.: 70A
- USB: Type C
- Weight: 23G
- Lipo: 3-6S
60A ESC
- Configurator for ESC Parameter setting and upgrading: BLHeliSuite32
- INAV firmware is supported： FLYCOLORF7MINI
- ARM: 32-bit Cortex, frequency up to 64 MHz
- ESC firmware: Flycolor_Raptor_5
- Mounting pattern: 20x20mm, M3
- PWM frequency: up to 128K
- MCU: STM32G0
Includes
- 1x Flycolor Raptor TR20 Mini Stack - F722 FC + 60A ESC - 20x20
- 1x 3mm Mounting Accessories Set
- 1x ESC /FC connecting wire
- 1x Electrolytic capacitor
- 1x Power wire(XT60)
The Flycolor Raptor TR20 Mini Stack features an F722 Flight Controller, equipped with dual VTX and dual LED pads, offering a convenient selection nearby for enhanced customization. With a voltage output range of 3.3V/0.1A, 5V/3A, and 9V/1.5A, this stack ensures stable power distribution. The MPU-6500 SPI gyro and STM32F722 MCU provide precise control, while the 60A ESC, with configurator support via BLHeliSuite32, INAV firmware compatibility, and a 20x20mm mounting pattern, delivers optimal performance for your FPV drone. Compact at 44x36mm and lightweight at 23g, the Raptor TR20 is designed for efficiency, supporting LiPo batteries from 3-6S and making it an ideal choice for your FPV drone and cinematography endeavors.
Check out all our 30x30mm Stacks and the rest of our Flycolor Products!
Features:
- Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling
- The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and *Multishot
- MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight
- Miniaturized and lightweight design, better routing, and component layout
- Configurator for ESC Parameter setting and upgrading: BLHeliSuite32
- MCU STM32G0, ARM 32-bit Cortex MCU, frequency up to 64 MHz
- All Dshot and Proshot signals are supported
- 20x20mm, M3 mounting pattern
- PWM frequency up to 128K
- Flycolor_Raptor_5 firmware
Specifications
-
F722 FLIGHT CONTROLLER
- Dual VTX and dual LED pads for convenient selection nearby.
- Voltage output: 3.3V/0.1A, 5V/3A , 9V/1.5A
- Gyro: MPU-6500 SPI
- FC BEC: 3.3V5V9V
- MCU: STM32F722
- Const Curr.: 60A
- Size(mm): 44*36
- Burst Curr.: 70A
- USB: Type C
- Weight: 23G
- Lipo: 3-6S
60A ESC
- Configurator for ESC Parameter setting and upgrading: BLHeliSuite32
- INAV firmware is supported： FLYCOLORF7MINI
- ARM: 32-bit Cortex, frequency up to 64 MHz
- ESC firmware: Flycolor_Raptor_5
- Mounting pattern: 20x20mm, M3
- PWM frequency: up to 128K
- MCU: STM32G0
Includes
- 1x Flycolor Raptor TR20 Mini Stack - F722 FC + 60A ESC - 20x20
- 1x 3mm Mounting Accessories Set
- 1x ESC /FC connecting wire
- 1x Electrolytic capacitor
- 1x Power wire(XT60)
Original: $75,265.00
-70%$75,265.00
$22,579.50Description
The Flycolor Raptor TR20 Mini Stack features an F722 Flight Controller, equipped with dual VTX and dual LED pads, offering a convenient selection nearby for enhanced customization. With a voltage output range of 3.3V/0.1A, 5V/3A, and 9V/1.5A, this stack ensures stable power distribution. The MPU-6500 SPI gyro and STM32F722 MCU provide precise control, while the 60A ESC, with configurator support via BLHeliSuite32, INAV firmware compatibility, and a 20x20mm mounting pattern, delivers optimal performance for your FPV drone. Compact at 44x36mm and lightweight at 23g, the Raptor TR20 is designed for efficiency, supporting LiPo batteries from 3-6S and making it an ideal choice for your FPV drone and cinematography endeavors.
Check out all our 30x30mm Stacks and the rest of our Flycolor Products!
Features:
- Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling
- The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and *Multishot
- MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight
- Miniaturized and lightweight design, better routing, and component layout
- Configurator for ESC Parameter setting and upgrading: BLHeliSuite32
- MCU STM32G0, ARM 32-bit Cortex MCU, frequency up to 64 MHz
- All Dshot and Proshot signals are supported
- 20x20mm, M3 mounting pattern
- PWM frequency up to 128K
- Flycolor_Raptor_5 firmware
Specifications
-
F722 FLIGHT CONTROLLER
- Dual VTX and dual LED pads for convenient selection nearby.
- Voltage output: 3.3V/0.1A, 5V/3A , 9V/1.5A
- Gyro: MPU-6500 SPI
- FC BEC: 3.3V5V9V
- MCU: STM32F722
- Const Curr.: 60A
- Size(mm): 44*36
- Burst Curr.: 70A
- USB: Type C
- Weight: 23G
- Lipo: 3-6S
60A ESC
- Configurator for ESC Parameter setting and upgrading: BLHeliSuite32
- INAV firmware is supported： FLYCOLORF7MINI
- ARM: 32-bit Cortex, frequency up to 64 MHz
- ESC firmware: Flycolor_Raptor_5
- Mounting pattern: 20x20mm, M3
- PWM frequency: up to 128K
- MCU: STM32G0
Includes
- 1x Flycolor Raptor TR20 Mini Stack - F722 FC + 60A ESC - 20x20
- 1x 3mm Mounting Accessories Set
- 1x ESC /FC connecting wire
- 1x Electrolytic capacitor
- 1x Power wire(XT60)
